8.26. Release v2026.11.0

8.26.1. Generated MAC addresses now depend on the network device name

With CONFIG_NET_ETHADDR_FROM_MACHINE_ID enabled, barebox derives the MAC address of a network device without one from the machine ID and the hostname. Network devices used to be told apart by adding their number to the derived address, which only works as long as all of them are named ethX. Now that network devices may be named otherwise, like usb0 of the new CDC EEM gadget, the device name is hashed in instead.

This changes the generated MAC address of every network device, so hosts that knew a board by its previous address, e.g. a DHCP server handing out a fixed lease, will see a new one. Addresses set by board code, NVMEM or the environment are not affected.

8.26.2. Deep probe is now the default on STM32MP13 and STM32MP15

barebox now enables deep probe for every st,stm32mp1xx compatible, even over barebox,disable-deep-probe. Report to the mailing list if that breaks your board.

8.26.3. devboot artifacts follow the boot net naming

devboot now looks up user-linux-<hostname> and user-initramfs-<hostname> instead of user-image-<hostname> and user-initrd-<hostname>, so the same files work for boot net.

8.26.4. FIT default configuration wins

When several FIT configurations match the barebox device tree equally well, the one named by default is now chosen instead of the first

8.26.5. Device tree node names are compared case-sensitively

Lookups by node name, including unit address, and alias stems are now case-sensitive, as in Linux.