4.11.3.15. Phytec phyCORE-i.MX31 CPU module PCM-037

4.11.3.15.1. The CPU module

http://www.phytec.eu/europe/products/modules-overview/phycore/produktdetails/p/phycore-imx31-2.html

This CPU card is based on a Freescale i.MX31 CPU. The card in configuration -0000REU is shipped with:

  • 128 MiB synchronous dynamic RAM (DDR type)
  • 64 MiB NAND flash
  • 32 MiB NOR flash
  • 512 kiB SRAM
  • 4kiB EEPROM
  • MMU, FPU
  • Serial, Ethernet, USB (OTG), I2C, SPI, MMC/SD/SDIO, PCMCIA/CF, RTC

4.11.3.15.2. Supported baseboards

Supported baseboards are:
  • Silica / Phytec PCM-970 via phyMAP-i.MX31, PMA-001

4.11.3.15.3. How to get barebox for Phytec’s phyCORE-i.MX31

Using the default configuration:

make ARCH=arm pcm037_defconfig

Build the binary image:

make ARCH=arm CROSS_COMPILE=armv5compiler

Note

replace armv5compiler with your ARM v5 cross compiler prefix, e.g.: arm-1136jfs-linux-gnueabi-

The resulting binary image to be flashed will be barebox.bin, whereas the file named just barebox is an ELF executable for ARM.