4. Board support

• 4.1. Aarch64
  • 4.1.1. Aarch64 Qemu virt
• 4.2. Texas Instruments AM335x
  • 4.2.1. Building barebox
  • 4.2.2. Starting and updating barebox
  • 4.2.3. AM335x Boards
• 4.3. QEMU vexpress
  • 4.3.1. ARM Qemu vexpress
• 4.4. Broadcom BCM283x
  • 4.4.1. Raspberry Pi
• 4.5. Cirrus Logic edb9xxx
  • 4.5.1. Cirrus Logic EP9301
  • 4.5.2. Cirrus Logic EDB9302
  • 4.5.3. Cirrus Logic EDB9302A
  • 4.5.4. Cirrus Logic EDB9307
  • 4.5.5. Cirrus Logic EDB9307A
  • 4.5.6. Cirrus Logic EDB9312
  • 4.5.7. Cirrus Logic EDB9315
  • 4.5.8. Cirrus Logic EDB9315A
• 4.6. TI Davinci
  • 4.6.1. virt2real
• 4.7. Canon DIGIC
  • 4.7.1. Canon PowerShot A1100 IS
• 4.8. barebox on (U)EFI
  • 4.8.1. Building barebox for EFI
  • 4.8.2. Running barebox on EFI systems
  • 4.8.3. Loading EFI applications
  • 4.8.4. Simple Network Protocol (SNP)
  • 4.8.5. EFI File IO Interface
  • 4.8.6. Block IO Protocol
  • 4.8.7. EFI device paths
  • 4.8.8. EFI variables
  • 4.8.9. EFI driver model and barebox
  • 4.8.10. Building EDK2
• 4.9. Garz & Fricke based boards
  • 4.9.1. Santaro (i.MX6)
• 4.10. iBASE MI991AF
  • 4.10.1. Running barebox
  • 4.10.2. Links
• 4.11. Freescale i.MX
  • 4.11.1. Internal Boot Mode
  • 4.11.2. External Boot Mode
  • 4.11.3. i.MX boards
• 4.12. MIPS
  • 4.12.1. D-Link DIR-320
  • 4.12.2. MIPS Creator CI20
  • 4.12.3. Loongson LS1B
  • 4.12.4. QEMU Malta
  • 4.12.5. Ritmix RZX-50
  • 4.12.6. TP-LINK MR3020
• 4.13. Marvell Embedded Business Unit (mvebu)
  • 4.13.1. Move of the Register Window
  • 4.13.2. RAM initialisation
  • 4.13.3. Booting second stage
  • 4.13.4. Booting from UART
  • 4.13.5. mvebu boards
• 4.14. Freescale MXS
  • 4.14.1. Bootlets
  • 4.14.2. Booting Freescale i.MXs
  • 4.14.3. Booting from USB
  • 4.14.4. Booting from SD cards
  • 4.14.5. Booting second stage
  • 4.14.6. MXS boards
• 4.15. Texas Instruments OMAP
  • 4.15.1. Bootstrapping a PandaBoard
  • 4.15.2. Networking
• 4.16. OpenRISC
  • 4.16.1. or1ksim
• 4.17. PowerPC boards
  • 4.17.1. Phytec phyCORE-MPC5200-Tiny
• 4.18. PXA boards
  • 4.18.1. Phytec phyCORE-PXA270
• 4.19. Rockchip RK3288
  • 4.19.1. Building barebox
  • 4.19.2. Starting and updating barebox
  • 4.19.3. RK3288 Boards
• 4.20. Rockchip RK3188
  • 4.20.1. Radxa Rock
• 4.21. Samsung S3C/S5P
  • 4.21.1. DIGI a9m2440
• 4.22. Sandbox
  • 4.22.1. Building barebox for simulation
  • 4.22.2. Running the sandbox
• 4.23. Altera SoCFPGA
  • 4.23.1. Bootstrapping
  • 4.23.2. Updating handoff files
  • 4.23.3. Integrating new SDRAM driver
• 4.24. Nvidia Tegra
  • 4.24.1. Building
  • 4.24.2. Kickstarting a board using USB
  • 4.24.3. Writing barebox to the primary boot device
• 4.25. UEMD
  • 4.25.1. MB 77.07
• 4.26. x86
  • 4.26.1. Features
  • 4.26.2. Restrictions
  • 4.26.3. Boot Preparations
  • 4.26.4. Keep Sectors free