4.6. TI Davinci

4.6.1. virt2real

virt2real is a miniature board for creation of WiFi or Internet controllable smart devices.

The board has

  • TI DaVinchi DM365 running at 300 MHz;
  • 128 MiB DDR2 SDRAM;
  • 256 MiB NAND Flash Memory;
  • 2 x UART serial interfaces;
  • 1 x Ethernet interface (Micrel KS8851);
  • 1 x USB interface;
  • microSD card slot.

The board uses U-Boot as bootloader.

4.6.1.1. Running barebox

  1. Connect to the boards’s UART0 (115200 8N1); Use J2.2 (GND), J2.4 (UART0_TXD), J2.6 (UART0_RXD) pins.
  2. Turn board’s power on;
  3. Wait for Hit any key to stop autoboot prompt and press the space key.
  4. Upload barebox.bin via Ymodem
virt2real ># loady
  1. Run barebox
virt2real ># go 0x82000000