1. User manual

Contents:

• 1.1. Introduction
  • 1.1.1. Feedback
• 1.2. barebox
  • 1.2.1. Getting barebox
  • 1.2.2. Configuration
  • 1.2.3. Compilation
  • 1.2.4. Starting barebox
  • 1.2.5. First Steps
  • 1.2.6. Building barebox tools
• 1.3. Networking
  • 1.3.1. Network configuration
  • 1.3.2. Network filesystems
  • 1.3.3. Network console
• 1.4. Automount
• 1.5. Memory areas
  • 1.5.1. Examples
• 1.6. Driver model
  • 1.6.1. Device detection
  • 1.6.2. Device parameters
• 1.7. Variables
  • 1.7.1. The global device
  • 1.7.2. Non volatile variables
  • 1.7.3. Non volatile device variables
  • 1.7.4. Magic variables
• 1.8. Hush shell
  • 1.8.1. Hush features
• 1.9. Default environment version 2
  • 1.9.1. /env/bin/init
  • 1.9.2. /env/init/
  • 1.9.3. /env/boot/
  • 1.9.4. /env/config
  • 1.9.5. /env/network/
  • 1.9.6. /env/bmode/
• 1.10. Updating barebox
  • 1.10.1. Repairing existing boot images
• 1.11. Image MetaData (IMD)
  • 1.11.1. Limitations
  • 1.11.2. IMD and barebox_update
• 1.12. Devicetree support
  • 1.12.1. The internal devicetree
  • 1.12.2. Devicetree commands
  • 1.12.3. Device tree overlays
• 1.13. PreBootLoader images (PBL)
  • 1.13.1. Technical background
• 1.14. Multi Image Support
  • 1.14.1. Technical background
• 1.15. Framebuffer support
  • 1.15.1. Framebuffer splash screen
  • 1.15.2. Framebuffer console
• 1.16. USB support
  • 1.16.1. USB host support
  • 1.16.2. USB device support
  • 1.16.3. USB OTG support
  • 1.16.4. USB Type-C support
  • 1.16.5. USB Gadget autostart Support
• 1.17. UBI/UBIFS support
  • 1.17.1. UBI Fastmap
• 1.18. Booting Linux
  • 1.18.1. Introduction
  • 1.18.2. The bootm command
  • 1.18.3. The boot command
  • 1.18.4. Network boot
• 1.19. Barebox Bootchooser
  • 1.19.1. Bootchooser Targets
  • 1.19.2. The Bootchooser Algorithm
  • 1.19.3. General Bootchooser Options
  • 1.19.4. Setup Example
  • 1.19.5. Scenarios
  • 1.19.6. Using the State Framework as Backend for Run-Time Variable Data
  • 1.19.7. Updating systems
• 1.20. barebox remote control
  • 1.20.1. Enabling remote control support
  • 1.20.2. Running the bbremote tool
  • 1.20.3. running commands on the target
  • 1.20.4. ping
  • 1.20.5. getenv
  • 1.20.6. interactive console
  • 1.20.7. transferring files
• 1.21. Appendix: System Setup
  • 1.21.1. Serial Console Access
  • 1.21.2. Network Access
• 1.22. Reset Reason
• 1.23. System Restart
• 1.24. Barebox State Framework
  • 1.24.1. Backends (e.g. Supported Memory Types)
  • 1.24.2. Backend-Types (e.g. state Storage Format)
  • 1.24.3. Backend Storage Types (e.g. Media Storage Layout)
  • 1.24.4. Redundant state Variable Set Copies
  • 1.24.5. Handling of Bad Blocks
  • 1.24.6. Examples
  • 1.24.7. Frontend
• 1.25. Random Number Generator support
  • 1.25.1. API
  • 1.25.2. User interface
• 1.26. OP-TEE
  • 1.26.1. Before Linux start
  • 1.26.2. During the PBL
• 1.27. Debugging with OpenOCD
• 1.28. Watchdog Support
  • 1.28.1. Barebox Watchdog Functionality
• 1.29. Reboot Mode
  • 1.29.1. User API
  • 1.29.2. Reset
  • 1.29.3. Disambiguation
• 1.30. VirtIO Support
  • 1.30.1. What’s VirtIO?
  • 1.30.2. Status
  • 1.30.3. Build Instructions
  • 1.30.4. Testing

• Search Page

• Index