Olimex LTD Olinuxino The CPU module

This CPU module is based on a Freescale i.MX23 CPU. How to get the bootloader binary image

Using the default configuration:

make ARCH=arm imx233-olinuxino_defconfig

Build the binary image:

make ARCH=arm CROSS_COMPILE=armv5compiler

NOTE: replace the armv5compiler with your ARM v5 cross compiler.

This produces the following images:

  • barebox-olinuxino-imx23-bootstream.img - Use with the bcb command

  • barebox-olinuxino-imx23-sd.img - Use for SD cards

  • barebox-olinuxino-imx23-2nd.img - Use for 2nd stage booting (with bootm - boot an application image)