4.15.4.1. NXP LS1046A Reference Design Board

4.15.4.1.1. Boot DIP Switches

Boot source selection happens via the the bottom most DIP switch (near the micro-usb port):

   OFF -> ON
  +---------+
1 |  O----  |
2 |  O----  |
3 |  ----O  |
4 |  O----  |
5 |  O----  |
6 |  O----  |
7 |  ----O  |  <---- Boot from QSPI (default)
8 |  O----  |
  +---------+

   OFF -> ON
  +---------+
1 |  O----  |
2 |  O----  |
3 |  ----O  |
4 |  O----  |
5 |  O----  |
6 |  O----  |
7 |  O----  |  <---- Boot from SDHC
8 |  O----  |
  +---------+

4.15.4.1.2. Known Issues

System reset may not complete if the CMSIS-DAP micro-usb is connected.