UEMD ==== MB 77.07 -------- MB 77.07 board uses MBOOT as bootloader. MBOOT is a U-Boot clone with reduced functionality. See https://github.com/RC-MODULE/mboot for details. Running barebox ^^^^^^^^^^^^^^^ 1. Connect to the boards's UART (38400 8N1); 2. Turn board's power on; 3. Wait ``Hit any key (in 2 sec) to skip autoload...`` prompt and press the space key; 4. Compile ``zbarebox.bin`` image and upload it to the board via tftp .. code-block:: none MBOOT # tftpboot zbarebox.bin greth: greth_halt TFTP Using GRETH_10/100 device TFTP params: server 192.168.0.1 our_ip 192.168.0.7 TFTP params: filename 'zbarebox.bin' load_address 0x40100000 TFTP Loading: ################ TFTP done .. 5. Run barebox .. code-block:: none MBOOT # go 0x40100000 ..