KARO TX28 CPU module ==================== The CPU module -------------- http://www.karo-electronics.de/ This CPU card is based on a Freescale i.MX28 CPU. The card is shipped with: * 128 MiB synchronous dynamic RAM (DDR2 type), 200 MHz support * 128 MiB NAND K9F1G08U0A (3.3V type) * PCA9554 GPIO expander * DS1339 RTC * LAN8710 PHY Supported baseboards -------------------- Supported baseboards are: * KARO's Starterkit 5 How to get barebox for 'KARO's Starterkit 5' -------------------------------------------- Using the default configuration: .. code-block:: sh make ARCH=arm tx28stk5_defconfig Build the binary image: .. code-block:: sh make ARCH=arm CROSS_COMPILE=armv5compiler **NOTE:** replace the armv5compiler with your ARM v5 cross compiler. This produces the following images: * barebox-karo-tx28-bootstream.img - Use with the bcb command * barebox-karo-tx28-sd.img - Use for SD cards * barebox-karo-tx28-2nd.img - Use for 2nd stage booting (with :ref:`command_bootm`)