MIPS Creator CI20 ================= The MIPS Creator CI20 board is a high performance, fully featured Linux and Android development platform. Major hardware features include: * Ingenic JZ4780 SoC (dual 1.2GHz MIPS32 processor); * 1 GiB DDR3 memory; * 8 GiB NAND Flash; * 2 x UART; * Davicom dm9000 10/100 Ethernet controller; * 2 x USB (host and OTG); * HDMI output; * 14-pin ETAG connector; * GPIO, SPI, I2C, ADC, expansion headers. The board uses U-Boot 2013.10 as bootloader. Running barebox --------------- 1. Boot the board with UART0 serial console. Stop the auto boot during U-boot. 2. Upload ``zbarebox.bin`` via Ymodem to the board and then run: .. code-block:: none ci20# loady 0xa8000000 ... ci20# go 0xa8000000 .. Links ----- * http://store.imgtec.com/product/mips-creator-ci20 * http://elinux.org/MIPS_Creator_CI20