1. D-Link DIR-320¶
The D-Link DIR-320 wireless router has
- BCM5354 SoC;
- 32 MiB SDRAM;
- 4 MiB NOR type Flash Memory;
- RS232 serial interface (LV-TTL levels on board!);
- 1xUSB interface;
- 4 + 1 ethernet interfaces;
- 802.11b/g (WiFi) interface;
- JTAG interface;
- 5 LEDs;
- 2 buttons.
The router uses CFE as firmware.
1.1. Running barebox¶
Barebox can be started from CFE using tftp. You must setup tftp-server on host 192.168.0.1. Put your barebox.bin to tftp-server directory (usual /tftpboot or /srv/tftp). Connect your DIR-320 to your tftp-server network via one of four <LAN> sockets.
Next, setup network on DIR-320 and run barebox.bin, e.g.:
CFE> ifconfig eth0 -addr=192.168.0.99
CFE> boot -tftp -addr=a0800000 -raw 192.168.0.1:barebox.bin
